Canon imagePROGRAF iPF8000S User Manual page 384

Printing banners or at other non-standard sizes
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
O
Click Size Options to display the Paper Size Options dialog box.
9.
Complete the following settings in the Paper Size Options dialog box.
1.
Enter a desired paper name in Custom Paper Size Name. "430 mm Square" is used in this example.
2.
Select mm or inch in Units.
3.
Enter "430" (16.9 in) in both Width and Height.
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
10.
Click Add to register "430 mm Square."
11.
Click OK to close the Paper Size Options dialog box.
12.
Click Cut Sheet in the
13.
A
In the Page Size list, click the size you added, "430 mm Square."
14.
Conrm the print settings and print as desired.
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Windows)". (→P.476)
368 Enhanced Printing Options
L
Paper Source list.