Canon imagePROGRAF iPF8000S User Manual page 410
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Tiling and multiple pages per sheet
14.
Make sure the width of the loaded roll is displayed in the
ISO A2/A3 (420.0mm).
Note
•
If the width of the loaded roll is not displayed in
pane and update the printer information.
15.
Conrm the print settings, and then click
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Mac OS 9)". (→P.552)
394 Enhanced Printing Options
B
Roll Paper Width list-in this case,
B
Roll Paper Width, click
N
Print to start printing.
L
Printer on the Main
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated