The Roll Is Empty; Sheet Printing Is Selected; Regular Printing Is Selected, But A Roll Is Loaded - Canon imagePROGRAF iPF771 User Manual

The roll is empty.

The roll is empty.
The roll is empty.
Cause
The roll is empty.
There is remaining
roll paper, but be-
cause it could not
be advanced, it
could not be detec-
ted.

Sheet printing is selected.

Sheet printing is selected.
You have attempted to print on a sheet, but
no sheet is loaded.

Regular printing is selected, but a roll is loaded.

Regular printing is selected, but a roll is loaded.

Cause
A print job for printing on
sheets was sent when a roll is
loaded.
560
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Press the Release Lever back and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
4.
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed
on the roll, also specify the paper length.
(See "Specifying the Paper Length.")
5.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change
the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet,
and then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have speci-
fied in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Corrective Action
P.327
➔
P.329
➔
P.320
➔
P.322
➔
P.325
➔
P.326
➔
Corrective Action
P.18
➔
Corrective Action
P.327
➔
P.18
➔
iPF770
P.52
➔
User's Guide