Canon imagePROGRAF iPF8000S User Manual page 82
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Control Panel
Information
System Info
Error Log
Job Log
HDD Information
66 Printer Parts
Setting Item
Version
Firm
Boot
MIT
Ext I/F
s/n
MAC
HDDSpace
########-####
(Choose from
Document Name
information about
the latest three print
User Name
jobs.)
Page Count
Job Status
Print Start Time
Print End Time
Print Time
Print Size
Media Type
Interface
Ink Consumed
HDDSpace
Description, Instructions
Displays the version of the printer and
rmware.
Displays the version of the boot ROM.
Displays the version of the MIT database
format.
Displays the name of interfaces
compatible with the expansion slot.
Displays the printer's serial number.
Displays the MAC address.
Displays the space available on the
printer's hard disk.
Displays the most recent error messages
(up to two).
Displays the document name in the last
print job.
Displays the name of the user who sent
the print job.
Displays the number of pages in the print
job.
Displays the results of the print job
processed.
Displays the time when the print job was
started.
Displays the time when the print job was
nished.
Displays the time required to print the job.
Displays the paper size in the print job.
Displays the paper type in the print job.
Displays the interface used for the print
job.
Displays the ink consumption.
Displays the space available on the
printer's hard disk.
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated