Cannot Feed Paper; Cannot Cut This Paper - Canon imagePROGRAF iPF8000S User Manual

Cannot feed paper.

Paper came out of the feed path during feeding.

Cannot cut this paper.

There are sheets left on the Ejection Guide.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
The Cutter Unit stops in the middle of cutting.
The Cutter Unit is not installed.
In other cases, the Cutter Unit may be damaged.
Cause
Cause
Corrective Action
Reload the paper correctly and advance it again.
(→P.121)
If the message is displayed when paper is not being
advanced, contact your Canon dealer for assistance.
Corrective Action
Lift the Release Lever and remove the paper.
Lift the Release Lever and remove the foreign object.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see Paper Reference Guide."
(→P.109)
Specify Manual as the method for cutting rolls and
cut the roll manually.
(→P.139)
For details on automatic cutting compatibility, see the
Paper Reference Guide.
(→P.109)
Move the Carriage to the left, remove the paper,
and return the Carriage to the right. If cutting is not
possible using the Cutter Unit, specify Manual as the
method for cutting rolls and cut the roll manually.
(→P.131)
(→P.139)
Install the Cutter Unit.
(→P.728)
Contact your Canon dealer for assistance.
Messages regarding paper
Error Message 791