Canon imagePROGRAF iPF8000S User Manual page 95
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Ink
Ink Tank
MBK Ink Tank (Matte Black Ink,
or black ink for matte paper)
BK Ink Tank (Black Ink)
C Ink Tank (Cyan Ink)
M Ink Tank (Magenta Ink)
Y Ink Tank (Yellow Ink)
PC Ink Tank (photo cyan ink)
PM Ink Tank (photo magenta ink) Pigment ink
GY Ink Tank (gray ink)
Capacity
*1: The provided Starter Ink Tanks contain 330 ml (11.2 oz) each.
Pigment ink
PFI-301MBK (330 ml [11.2 oz]) or
PFI-701MBK (700 ml [23.7 oz])
Pigment ink
PFI-301BK (330 ml [11.2 oz]) or
PFI-701BK (700 ml [23.7 oz])
Pigment ink
PFI-301C (330 ml [11.2 oz]) or PFI-701C
(700 ml [23.7 oz])
Pigment ink
PFI-301M (330 ml [11.2 oz]) or PFI-701M
(700 ml [23.7 oz])
Pigment ink
PFI-301Y (330 ml [11.2 oz]) or PFI-701Y
(700 ml [23.7 oz])
Pigment ink
PFI-301PC (330 ml [11.2 oz]) or
PFI-701PC (700 ml [23.7 oz])
PFI-301PM (330 ml [11.2 oz]) or
PFI-701PM (700 ml [23.7 oz])
Pigment ink
PFI-301GY (330 ml [11.2 oz]) or
PFI-701GY (700 ml [23.7 oz])
330 or 700 ml (11.2 or 23.7 oz) per color
(*1)
Printer Specications
Printer Parts 79
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated