Canon imagePROGRAF iPF8000S User Manual page 496
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printer Driver
Using Favorites (Windows)
This topic describes how to register favorites and print using favorite settings.
Registering a favorite
Follow the steps below to save the current print settings as a favorite.
1.
Choose Print in the application menu.
2.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.482)
3.
Complete the print settings.
4.
Click the Favorites tab to display the Favorites sheet.
5.
H
Click
Add to display the Add dialog box.
6.
Complete the following settings in the Add dialog box.
•
Enter a desired name in Name, such as "Photos for Presentations" or "Monthly Report."
•
Choose a tting icon for these print settings in the Icon list.
•
In Comment, enter a description of the favorite to be added, as desired.
7.
Click OK to close the Add dialog box.
The favorite you have added is now displayed in
Note
•
To save a favorite as a le, click
480 Windows Software
A
Favorites.
J
Export and specify the le to save.
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated