Canon imagePROGRAF iPF8000S User Manual page 649
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Using the Control Panel
1.
Press the Menu button to display Menu Durng Prtng.
2.
You can manage queued jobs as follows.
•
Deleting queued jobs
1.
Press ▲ or ▼ to select Job Mgmt Menu, and then press the OK button.
2.
Press ▲ or ▼ to select Job Queue Ope., and then press the ► button.
3.
Press ▲ or ▼ to select the print job to delete, and then press the ► button.
4.
Press ▲ or ▼ to select Delete, and then press the OK button.
•
Changing the order of printing
1.
Press ▲ or ▼ to select Job Mgmt Menu, and then press the OK button.
2.
Press ▲ or ▼ to select Job Queue Ope., and then press the ► button.
3.
Press ▲ or ▼ to select the job to print rst, and then press the ► button.
4.
Press ▲ or ▼ to select Priority, and then press the OK button.
Using RemoteUI
On the Print Job page, select the job to manage and how to manage it. For details, refer to the RemoteUI help.
Basic Print Job Operations
Print Jobs 633
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated