Canon imagePROGRAF iPF8000S User Manual page 306

Printing enlargements or reductions
7.
Click Roll Paper in the
8.
Select the width of the loaded roll in the
(420.0mm).
9.
A
In the Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
10.
Select the
11.
Click ISO A4 in the
12.
F
Click Scaling and enter "120."
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is
printed in the upper-left corner. In this case, you can center originals by selecting
on the Layout sheet.
13.
Conrm the print settings and print as desired.
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Windows)". (→P.476)
290 Enhanced Printing Options
L
Paper Source list.
C
Enlarged/Reduced Printing check box.
G
Paper Size list.
M
Roll Paper Width list-in this case, ISO A2/A3 Roll
G
Print Centered