Canon imagePROGRAF iPF8000S User Manual page 646
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Basic Print Job Operations
Using the printer driver (Mac OS X)
1.
Access the Additional Settings pane.
2.
Choose an Send job to.
•
Print
Save print jobs automatically at the same time they are printed.
•
Print (auto delete)
Save print jobs temporarily at the same time they are printed and delete them after printing.
•
Save in mail box
Save print jobs on the printer without printing them.
The Destination dialog box is displayed if you select Save in mail box. Here, specify the name
and Personal Box number for saved print jobs.
1.
In Document title, enter a name to identify saved print jobs.
2.
Select the Personal Box number in the Mail box list.
3.
Click OK to close the Destination dialog box.
Note
•
Save data before printing
This option is available in combination with Print, Print (auto delete), and Save in mail box. Print
jobs are saved on the hard disk and then printed.
630 Print Jobs
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated