Canon imagePROGRAF iPF8000S User Manual page 506

Printer Driver
Media Detailed Settings Dialog Box (Windows)
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
•
To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media
Type. (→P.486)
Setting Item
A
Media Type
B
Drying Time
C
Between Pages
D
Between Scans
E
Roll Paper Margin for
Safety
F
Near End Margin
G
Cut Speed
H
Calibration Value
I
Mirror
490 Windows Software
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide. (→P.109)
Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.136)
Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen.
Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
You can specify whether to apply the results of calibration performed on the
printer to image processing.
Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
Description