Printing Posters In Sections - Canon imagePROGRAF iPF8000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printing Posters in Sections
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you
can create a poster larger than the maximum supported paper size of the printer.
Page Layout
Choose poster printing.
For instructions on printing large posters, refer to the following topics, as appropriate for your computer
and operating system.
•
Printing Large Posters (Windows) (→P.396)
•
Printing Large Posters (Mac OS 9) (→P.398)
Note
•
This method of poster printing is supported in Windows and Mac OS 9.
Tiling and multiple pages per sheet
Enhanced Printing Options 395
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated