Removing The Apg Assy - Epson Stylus Photo R340 Service Manual

EPSON Stylus Photo R340/350

2.3.19 Removing the APG Assy.

Illustration
Left Rear Side of the Printer
Figure 2-66. Removing the APG Assy.
Disassembly and Assembly
APG Assy.
C.B.S 3x6 (6-8kgf.cm)
Disassembly
Parts/Components must be removed to remove the APG Assy.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing,
Rear Housing, Main Board Assy., ASF Assy., Shaft Assy. Holder,
Printer Mechanism
Disassembly Procedure
1. Remove the screw ( ) that secures the APG Assy., and remove it.
Reinstall the APG Assy. in the order given below.
1. Set the two tabs ( ) into the corresponding holes on the Main
Frame.
2. Insert the arm into the slit of the Main Frame.
3. Set the two guide pins ( ) into the positioning holes.
Arm
Guide Pins
Figure 2-67. Reinstalling the APG Assy.
Revision A
Hooked Tabs
77