Disassembling The Printer Mechanism; Apg Assy - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100

4.4 Disassembling the Printer Mechanism

4.4.1 APG Assy

1. Remove the Upper Housing / Printer Cover. (p.72)
2. Disconnect the APG Motor connector cable from connector CN118 (red) on the
Main Board.
3. Peel off the acetate tape, and remove the APG Motor cable from the ASF Assy.
4. Disconnect the cables from the two APG Sensor connectors.
Hook the APG Motor
cable on the two tabs
of the ASF Assy.
Acetate tape
Figure 4-28. Disconnecting the Cables
Referring to Figure 4-28, correctly route the APG connector cable.
Disassembly And Assembly
APG Motor
APG Assy
APG Sensor
connectors
CN118
Disassembling the Printer Mechanism
5. Remove the three C.B.S. M3 x 6 screws that secure the APG Assy, and remove the
APG Assy from the Main Frame.
1
2
Figure 4-29. Removing the APG Assy
Revision C
2) C.B.S. M3x6
(8±1 kgf.cm)
3
Confidential
78