Removing Apg Assy - Epson Stylus Photo R320 Service Manual

EPSON Stylus Photo R320

2.3.12 Removing APG Assy.

External View
CN7
Acetate Tape ASF Assy.
3
Tie wrap Screw, Frame, Main (5-7kgf.cm)
Figure 2-32. Removing "APG Assy."
DISASSEMBLY AND ASSEMBLY
Hook
Acetate Tape
Connector Cable
2 1
APG Assy.
C.B.S 3x6 (6-8kgf•cm)
Parts/Units which should be removed before removing "APG Assy."
Paper Support Assy./Preview Monitor Unit/Housing, Upper/Housing, Middle
Procedure for Removing
1. Disconnect the connector cable of "PG Motor" from CN7 of "Main Board".
2. Release the connector cables of "PF Motor" and "PG Motor" from the
following points.
Take off the Acetate Tape(x2).
Remove from the hook on "ASF Assy".
Cut the tie wrap
Remove the screw (Screw, Frame, Main) (x3) which secure the connector
cable.
3. Remove the screw which secures "APG Assy.". Then, remove "APG Assy.".
Disassembly
Revision B
57