Epson Stylus Photo R340 Service Manual page 19

EPSON Stylus Photo R340/350
Occurrence
Timing Symptoms
CR Position
• Occurrence
The LD Roller shaft rotates to feed
Timing:
paper, but the Hopper does not operate.
During
operation
• CR Position:
---
The LD Roller shaft rotates properly, but
the paper is not fed at all.
Troubleshooting
Table 1-7. Troubleshooting of Paper Out Error based on Observed Symptom
Failed Part
ASF Assy. 1. Check the Hopper if it works properly during feeding
paper.
Compression
Spring 2.51
Shaft Assy. Holder 1. Check the LD Roller surface if it is free of paper dust.
Troubleshooting
Check Point
1. Reattach the Compression Spring 2.51
Hopper
1. Wipe the paper dust on the LD Roller with a
LD Roller
Revision A
Remedies
between the ASF Frame and the Hopper
properly.
clean cloth moistened with alcohol.
* If the problem still occurs after performing
the above remedies, replace the LD Roller
with a new one.
19