EPSON Stylus Photo R340/350
2.3.7 Removing the Stacker Assy.
Stacker Paper Stoppers
Stacker Assy. (Center)
Figure 2-17. Removing the Stacker Assy.
Disassembly and Assembly
Parts/Components must be removed to remove the Stacker Assy.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing
Release the shaft of the Stacker Shaft with a flat-blade screwdriver and pull
the left side of the Stacker Assy. toward you to remove the assy.
The two Stacker Paper Stoppers must be securely affixed to the
ribs of the Stacker Assy.
Figure 2-18. Reattaching the Stacker Paper Stoppers
Make sure to put the guide pin of the Stacker Assy. into the
positioning hole on the frame.
Figure 2-19. Reinstalling the Stacker Assy.
Right Side of the Printer