Epson Stylus Photo R340 Service Manual page 87

EPSON Stylus Photo R340/350
Reinstalling the CD-R Guide Assy.
Install the CD-R Guide Assy. first from its left side, and
right side, and then the center portion.
Move the coiled part of the Right EJ Grounding Spring in
the direction of the arrow, and hitch the shorter leg of the
spring to the tab of the CD-R Guide Assy. while holding the
other longer leg with your fingers. Bring the longer leg to
contact with the surface of the EJ Roller Assy.
Before reassembling
the Printer Mechanism
Longer Leg
Shorter Leg
After reassembling the
Printer Mechanism
EJ Roller
Assy.
Figure 2-84. Reattaching the Right EJ Grounding Spring
Make sure that the Left and Right CD-R Links are
correctly installed.
Make sure that the connector cable of the Tray/CD-R
Sensor does not interfere with the Right CD-R Link.
Make sure that the EJ Frame Assy. moves smoothly
together with the CD-R Guide Assy.
Reinstalling the Main Frame Support Plate
Tighten the screws in the order shown in
Disassembly and Assembly
Right EJ Grounding Spring
Figure 2-79.
Disassembly
Revision A
87