EPSON Stylus Photo R340/350
The Carriage Unit hits against the right
side of the Main Frame at power-on.
• CR Position:
Table 1-6. Troubleshooting of Fatal Errors based on Observed Symptom (continued)
1. Check if the Head cable is correctly connected to the
2. Check if the Head Cable is damaged.
connector on the CR Encoder Sensor Board and CN9 on
the Main Board.
1. Correctly connect the Head cable to the
connector on the CR Encoder Sensor Board
and CN9 on the Main Board.
2. Replace the Head Cable with a new one.