Download  Print this page

Advertisement

EPSON Stylus Photo R340/350
Illustration (2)
Panel Board
C.B.P 2x6 (4-6kgf.cm)
1
Buttons
Figure 2-9. Removing the Panel Board/LCD Module (2)
Disassembly and Assembly
Hooked Tabs
2
LCD Module
Buttons
Hooked Tabs
8.
Release the four tabs ( ) that secure the Panel Board and remove it.
9.
Remove the all buttons from the Housing Panel Assy.
10. Remove the two screws (
11. Release the LCD Module from the two tabs ( ) by pulling the module
toward the opposite direction of the tabs attached side, and remove the LCD
Module from the Housing Panel Assy.
Tighten the screws to secure the LCD Module in the order
shown in
Make sure the four positioning holes of the Panel Board are
aligned with the two screw holes and put onto the two guide
pins.
Tighten the screws to secure the Panel Shield Plate in the order
shown in
Make sure that the Cosmetic Panel is properly fitted on the
Panel Board Assy.
Disassembly
) that secure the LCD Module.
Figure
2-9.
Positioning Holes
Figure 2-10. Reinstalling the Panel Board
Figure
2-8.
Revision A
47

Advertisement

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: