Epson Stylus Photo R340 Service Manual page 79

EPSON Stylus Photo R340/350
Illustration (2)
Right Parallel Right Scale
Adjust Bushing Holder
C.B.S(P4) 3x6
(6-8kgf.cm)
E Ring
Right CR
Cam
Right Side of
the Printer
Left Scale Holder
Left Side of
the Printer
E Ring
Flat Washer
E Ring
Flat Washer
Spring Washer
Figure 2-69. Removing the Carriage Unit (2)
Disassembly and Assembly
CR Guide Shaft Right Side of the Printer
Hooked
Tab
CR Shaft Right Fixed Spring
Left CR Cam
When performing the next step, be careful not to lose the Scale
C A U T I O N
Holder Sliders.
Left Side of the Printer
8. Remove the E ring from the right edge of the CR Guide Shaft, and remove the
Right Scale Holder, Right CR Cam and the Scale Holder Slider.
9. Remove the screw (
remove it.
10. Release the CR Shaft Right Fixed Spring from the tab ( ) of the Main Frame,
and remove the spring from the CR Guide Shaft.
11. Remove the upper E ring and flat washer that secure the Left Scale Holder.
12. Remove the lower E ring, flat washer and spring washer that secure the Left
Scale Holder and remove the Left Scale Holder.
13. Slide the CR Guide Shaft rightward to pull it out of the Left CR Cam and
Main Frame, and remove the Carriage Unit together with the CR Guide Shaft.
14. Pull out the CR Guide Shaft from the Carriage Unit.
Disassembly
Scale Holder Sliders Right Side of the Printer
Figure 2-70. Scale Holder Sliders
) that secures the Right Parallel Adjust Bushing and
Revision A
79