Download Print this page

Advertisement

EPSON Stylus Photo R340/350
Make sure that the Head Cable is correctly connected to the
Print Head.
Set the two positioning holes ( ) of the Print Head onto the two
guide pins.
Figure 2-52. Reinstalling the Print Head
Tighten the screws to secure the Print Head in the order shown
in
Figure
2-51.
Whenever the Print Head is reinstalled or replaced, be sure to
A D J U S T M E N T
R E Q U I R E D
perform the required adjustments in the order given below.
(See Chapter 3 for details on the adjustments)
1.
Initial Ink Charge (only when the Print Head is replaced)
2.
Head ID input (only when the Print Head is replaced)
3.
First Dot adjustment
4.
PW Sensor adjustment
5.
Head Angle adjustment
6.
Bi-D Adjustment
Disassembly and Assembly
Positioning Holes
Disassembly
Revision A
68

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: