Epson Stylus Photo R340 Service Manual page 60

EPSON Stylus Photo R340/350
Reassembling the ASF Assy.
Hitch the L-shaped leg of the Torsion Spring 6.45 to the
shaft of the Paper Back Lever, and hitch the other shorter
leg of the spring to the groove of the ASF Assy.
Torsion Spring 6.45
Shorter Leg
Figure 2-34. Reattaching the Torsion Spring 6.45
Make sure that the Paper Back Lever and the Retard Roller
Assy. move smoothly.
Tighten the screws to secure the ASF Frame Support Plate
in the order shown in the figure below.
1
Figure 2-35. Reinstalling the ASF Frame Support Plate
Disassembly and Assembly
L-shaped Leg
2
Reinstalling the ASF Assy.
Attach the Compression Spring 2.51 to the rib ( ) of the
Hopper and the two ribs ( ) of the ASF Frame, and make
sure that the Hopper moves smoothly.
Set the guide pin ( ) of the ASF Assy. and the rib ( ) in
the positioning holes.
Right Side of the Printer
Disassembly
Ribs
Figure 2-36. Reinstalling the Hopper
Rib
Guide Pin
Figure 2-37. Reinstalling the ASF Assy. (1)
Revision A
60