Download  Print this page

Advertisement

EPSON Stylus Photo R340/350
Function Item
First Dot
This adjustment is made to correct the First Dot Position in
Adjustment
the CR main scanning direction.
Top Margin
This adjustment is made to correct the top margin.
Adjustment
Offset Input for CR
When the Main Board, CR Motor or PSB/PSE Board is
Motor Calorific
changed individually, this adjustment is made to write the
Limitation
maximum offset to prevent the occurrence of damage to the
motor at the time of CR Motor heat generation.
However, when the CR Guide Shaft is changed together with
the above part, this adjustment is made to measure the
manufacturing variations of the CR Motor and PSB/PSE
Board, utilize the motor capability to the maximum for
motor heat generation control, and prevent the motor from
being damaged by CR Motor heat generation.
Adjustment
Table 3-2. Adjustment Items
Purpose
Enter the correction value in the program using the rule position of the print
pattern as a reference. The correction value is saved to the specific EEPROM
address on the Main Board.
Enter the correction value in the program using the rule position of the print
pattern as a reference. The correction value is saved to the specific EEPROM
address on the Main Board.
Selecting this function saves the offset into the EEPROM.
Adjustment by using adjustment program
Method Outline
Revision A
Used Media
Plain paper (A4)
Plain paper (A4)
Non-target
102

Advertisement

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: