Download Print this page

Advertisement

EPSON Stylus Photo R340/350

2.3 Disassembly

The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Start
Removing the Paper Support
Removing the Left Housing
Assy. (p.42)
(p.43)
Removing the Upper Housing
(p.48)
Removing the Main Board
Removing the Rear Housing
Assy. (p.54)
(p.50)
Removing the ASF Assy.
Removing the CR Motor
(p.58)
(p.66)
Removing the Shaft Assy.
Holder (p.62)
Removing the Printer
Mechanism (p.70)
Removing the Power Supply
Removing the Ink System
Assy. (p.74)
(p.88)
Removing the Waste Ink Pads
(p.75)
Removing the Stacker Assy.
(p.51)
Removing the Lower Housing
(p.76)
NOTE 1: Parts or units indicated in
do not mean that they can be omitted to disassemble. They also should
be disassembled for disassembling the following parts or units in the flowchart.
NOTE 2: To remove the part or component shown in a green box, the parts or components in yellow boxes located
just above the green box must be removed.
Disassembly and Assembly
Removing the Right Housing
Removing the Panel Board/
(p.44)
LCD Module (p.46)
Removing the Stacker Assy.
Removing the Front Paper
(p.51)
Guide Porous Pads (p.52)
Removing the APG Assy.
Removing the PF Motor (p.95)
(p.77)
Removing the Carriage Unit
(p.78)
Removing the CD-R Guide
Assy. (p.84)
Removing the Front Paper
Guide and EJ Roller Assy. (p.91)
Removing the PF Roller Assy.
(p.96)
Figure 2-1. Removing Procedure Flowchart
Disassembly
Since a prototype was used to illustrate these
C H E C K
P O I N T
disassembly and assembly procedures, the
appearance of some parts may differ from those
on an actual product. The procedures
themselves, however, are accurate for the retail
model.
Removing the Print Head
(p.67)
Removing the Upper Paper
Guide (p.69)
Removing the Print Head
(p.67)
Removing the Upper Paper
Guide (p.69)
Revision A
41

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: