Download Print this page

Advertisement

EPSON Stylus Photo R340/350
Illustration (2)
C.B.P 3x8
(6-8kgf.cm)
2
3
C.B.S 3x6
(6-8kgf.cm)
Lower Housing
Hooked Tabs
Figure 2-25. Removing the Main Board Assy. (2)
Disassembly and Assembly
PG Detector Holder
Contact
Point
C.B.P 3x8
(6-8kgf.cm)
Main Board Assy.
Illustration (3)
2
C.B.S 3x6
(4-6kgf.cm)
Figure 2-26. Removing the Main Board Assy. (3)
1
5.
Remove the three screws (
6.
Pull the right side of the Lower Housing ( ) toward you, and lift the front
side of the Main Board Assy. to release it from the hooked tab ( ) and the
other two tabs ( ). Then remove the Main Board Assy. rightward avoiding a
contact with the PG Detection Holder.
7.
Remove the two screws (
8.
Remove the Optical Tube Slot from the Housing Slot.
Disassembly
Housing Slot
Optical Tube Slot
1
Positioning Grooves
) that secure the Main Board Assy.
) that secure the Housing Slot and remove it.
Revision A
55

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: