Download Print this page

Advertisement

EPSON Stylus Photo R340/350
Occurrence
Timing
Symptoms
CR Position
• Occurrence
Paper edge cannot go through between
Timing:
the EJ Roller and the Star Wheels.
During
operation
• CR Position:
---
* Jammed paper sometimes contacts with the Print Head and can damage the head.
Troubleshooting
Table 1-8. Troubleshooting of Paper Jam Errors based on Observed Symptom (continued)
Failed Part
EJ Frame Assy.*
Spur Gear 41.38*
EJ Roller Assy.*
Check Point
1. Check if the Star Wheel Holder has not come off.
EJ Frame Assy.
Star Wheel Holder
2. Check if the EJ Frame Assy. is properly installed.
3. Check the EJ Frame Assy. for deformation (if it warped
downward).
1. Check if the Spur Gear 41.38 is damaged.
Spur Gear 41.38
1. Check if the EJ Roller Assy. is properly installed.
EJ Roller Assy.
Troubleshooting
Revision A
Remedies
1. Install the Star Wheel Holder correctly.
2. Install the EJ Frame Assy. correctly.
3. Replace the EJ Frame Assy. with a new one.
1. Replace the Spur Gear 41.38 with a new one.
1. Install the EJ Roller Assy. correctly.
23

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: