Removing The Upper Paper Guide - Epson Stylus Photo R340 Service Manual

EPSON Stylus Photo R340/350

2.3.14 Removing the Upper Paper Guide

Illustration
Upper Paper Guides
PF Roller Assy. Transparent sheet
Figure 2-53. Removing the Upper Paper Guide
Disassembly and Assembly
Torsion Springs 122.2
3 2 1
Lower Paper Guide
Hooked Tabs
Guide Pins
Parts/Components must be removed to remove the Upper Paper Guide.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing,
Rear Housing, Main Board Assy., ASF Assy., Shaft Assy. Holder
Disassembly Procedure
1. Move the Carriage Unit to the home position.
2. Put a transparent sheet on the Upper Paper Guide and the PF Roller Assy.
3. Release the three Torsion Springs 122.2 from the tabs ( ) of the Main Frame
and remove the springs toward you.
4. Release the six tabs ( ) that secure the three Upper Paper Guides (two tabs
for each), and slightly lift the guides to pull out the guide pins ( ).
5. While pressing down the Lower Paper Guide, pull out the six tabs ( )
released at Step 4 toward you, and pull out the three Upper Paper Guides.
Put the leg of the Torsion Springs 122.2 into the groove of the
Upper Paper Guide.
Figure 2-54. Reattaching the Torsion Springs 122.2
Attach the Upper Paper Guide in the order shown in
2-53.
Disassembly
Revision A
Figure
69