L800/L801
1.5.16 APG Sensor Assy
¸ Removal procedure
1.
Disengage the two hooks and remove the APG Sensor Assy.
APG Sensor Assy
Figure 1-107. Removing the APG Sensor
Disassembly/Reassembly
Downloaded from
www.Manualslib.com
:Hook
manuals search engine
1.5.17 Front Paper Guide Assy
Do not touch the surface of the rubber roller of the EJ Roller Assy
C A U T I O N
and the coated part of the PF Roller Assy as it can adversely affect
the print quality.
¸ Removal procedure
1.
Remove the screw and remove the Parallelism Bushing L.
Screw
: C.B.S.(P2) M3x8 (tightening torque: 6-8 kgf.cm)
[Rear Side]
Positioning Hole and Guide Pin
Figure 1-108. Removing the Parallelism Bushing L
APG Sensor Assy
Revision A
Parallelism Bushing L
Front Paper Guide Assy
57
Confidential