EPSON Stylus Photo R340/350
Reattaching the Card Slot Cover Spring
Insert the shorter leg of the spring into the groove of the
upper guide pin ( ) of the Card Slot Cover, and secure the
longer leg of the spring by the hooked tab ( ) on the Right
Housing.
Right Housing (inside)
1
Figure 2-6. Reattaching the Card Slot Cover Spring
Reinstalling the Right Housing
Make sure there is no gap between the Right Housing and
the Upper Housing.
Upper Housing
Should be
No Gap
Figure 2-7. Reinstalling the Right Housing
Disassembly and Assembly
Hooked Tab
Groove on the Guide Pin
2
Longer Leg
Disassembly
Revision A
45