CLUTCH MASTER CYLINDER REMOVAL
AND DISASSEMBLY
• Drain clutch fluid. (
• Disconnect the clutch lever position switch lead wires.
• Place a rag underneath the union bolt on the master cylinder
to catch spilled drops of brake fluid. Remove the union bolt
and disconnect the clutch hose from the master cylinder.
• Remove the clutch master cylinder.
Completely wipe off any brake fluid adhering to any
parts of motorcycle. The fluid reacts chemically with
paint, plastics, rubber materials, etc. and will damage
them severely.
• Remove the reservoir cap , insulator and diaphragm .
• Remove the clutch lever and clutch lever position switch
.
• Remove the reservoir tank .
• Remove the O-rings .
8-86)
CHASSIS 8-89