BinTec RS120 Reference Manual page 91

bintec elmeg GmbH
bintec RS Series
Symbol
Pay particular attention to the following message:
"Warning: Changes not supported by the Setup Tool!" If you change them with the
GUI, this can cause inconsistencies or malfunctions. Therefore, it is recommended that
the configuration is continued with the Setup Tool.
5.3.1.3 GUI Menus
The configuration options of your device are contained in the sub-menus, which are dis-
played in the navigation bar in the left-hand part of the window.
Note
Please note that not all devices have the full range of functions. Check the software of
your device on the corresponding product page under
SNMP Browser
If you select the
all internal system MIB tables and can modify the saved values. This view is only provided
for professional configuration and extended monitoring.
SNMP (Simple Network Management Protocol) is a protocol that allows access for config-
uring your device. All configuration parameters are stored in the MIB (Management Inform-
ation Base) in the form of MIB tables and MIB variables. You can read and modify these
directly via the SNMP browser.
Caution
This configuration method assumes an in-depth system knowledge of bintec devices!
Meaning
This symbol appears in messages referring you to settings
that were made with the Setup Tool.
This symbol appears in messages referring you to the fact
that values were entered or selected incorrectly.
option under View header, you will see an HTML view of
5 Access and configuration
www.bintec-elmeg.com .
77