BinTec RS120 Reference Manual page 308

Table of Contents

Fields in the Dial Numbers menu

Fields in menu Dial Number Configuration (appears only for Entries = Add)

Number of Used Ports Select which port is used.

Fields in the IP Options menu.

: Static channel bundling.

: Dynamic channel bundling.

Add new entries with Add.

Only if Entries =

The calling party number of the call is compared with the num-

ber entered under Call Number. Defines whether Call Number

should be used for incoming or outgoing calls or for both. Pos-

sible values:

(default value): For incoming and outgoing calls.

: For incoming calls, where your connection partner

dials in to your device.

: For outgoing calls, where you dial your connec-

tion partner.

The calling party number of the incoming call is compared with

the number entered under Call Number.

Enter the connection partner's numbers.

Select whether and how routes are propagated via the interface

and/or OSPF protocol packets are sent.

Possible values:

(default value): OSPF is not activated for this inter-

face, i.e. no routes are propagated or OSPF protocol packets

sent over this interface. Networks reachable over this inter-

face are, however, included when calculating the routing in-

formation and propagated over active interfaces.

bintec elmeg GmbH

bintec RS Series

Show Quick Links

Table of Contents