BinTec RS120 Reference Manual page 231

bintec elmeg GmbH
bintec RS Series
Field
dress/Netmask
New Destination Port
New Source IP Ad-
dress/Netmask
New Source Port
Description
Enter the destination IP address and corresponding netmask to
which the original destination IP address is to be translated.
Only for Type of traffic =
Service =
Leave the destination port as it appears or enter the destination
port to which the original destination port is to be translated.
Select to leave the original destination port. If you
disable , an input field appears and you can enter a
new destination port.
is active by default.
Only for Type of traffic =
method =
Enter the source IP address to which the original source IP ad-
dress is to be translated, with corresponding netmask, as the
case arises.
Only for Type of traffic =
method = , Service =
tocol = , ,
Leave the source port as it appears or enter a new source port
to which the original source port is to be translated.
leaves the original source port. If you disable
, an input field appears in which you can enter a new
source port. is active by default.
If you select
Range, you can choose from the follwing options:
•
for Original Source Port/Range is not changed, all port num-
bers are retained.
•
input field for you to specify the port number with which to
start the port range that replaces the original port rannge. The
count of ports is retained.
and Protocol = , ,
and Pro-
for Original Source Port/
: The range specified
: There is an
11 Networking
,
and NAT
, NAT
217