BinTec RS120 Reference Manual page 188

10 Wireless LAN
174
The Wireless LAN->WLAN->Radio Settings->
Fields in the menu Wireless Settings
Field
Operation Mode
Client Mode
Operation Band
menu consists of the following fields:
Description
Define the mode in which the wireless module of your device is
to operate.
Possible values:
• (default value): The wireless module is not active.
• : Your device is used as an access point in
your network.
• : Your device serves as an Access Client in
your network.
Only for Operation Mode =
Select the client connection mode to the access point.
Possible values:
• (default value): In a network in infrastruc-
ture mode, all clients communicate with each other via access
points only. There is no direct communication between the in-
dividual clients.
• : In ad-hoc mode, an access client can be used as
central interface between a number of terminals. In this way,
devices such as computers and printers can be wirelessly in-
terconnected.
Select the Channel to be used.
Select the operation band and, where applicable, the usage
area of the wireless module.
For Operation Mode =
and Client Mode =
Possible values:
•
ated at 2.4 GHz (mode 802.11b and mode 802.11g), inside or
outside buildings.
• : Your device runs in 5 GHz (Mode 802.11a/h)
inside buildings.
bintec elmeg GmbH
or Operation Mode =
(default value): Your device is oper-
bintec RS Series