BinTec RS120 Reference Manual page 158

8 Physical Interfaces
144
Field
Port Usage
ISDN Configuration
Type
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
X.31 (X.25 in D Chan-
nel)
X.31 TEI Value
Description
• All possible values for the Port Usage and the ISDN Config-
uration Type.
• : Detection is still running.
Only if Autoconfiguration on Bootup is disabled.
Select the protocol that you want to use for the ISDN port.
Possible values:
• : The ISDN connection is not used.
•
•
Only if Autoconfiguration on Bootup is disabled and for Port
Usage =
Select the ISDN connection type.
Possible values:
•
connection
• : Point-to-point ISDN access.
Description
Select whether you want to use X.31 (X.25 in the D channel)
e.g. for CAPI applications.
The function is enabled with
The function is disabled by default.
Only if X.31 (X.25 in D Channel) is enabled
With the ISDN autoconfiguration, the X.31-TEI is detected auto-
matically. If the autoconfiguration has not detected TEI, you can
manually enter the value assigned by the exchange.
Possible values are to
bintec elmeg GmbH
is set.
(default value): Point-to-multipoint
.
.
bintec RS Series