Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Destination Port/Range Enter, if required, a destination port number or a range of des-
Source Interface
Source IP Address/
Netmask
Source Port/Range
Special Handling Timer Enter the time period during which the specified data packets
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
Frozen Parameters
Description
tination port numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
If required, select your device's source interface.
Enter, if required, the source IP address and netmask of the
data packets.
Possible values:
•
(default value)
•
: Enter the IP address of the host.
•
: Enter the network address and the related net-
mask.
Enter, if required, a source port number or a range of source
port numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
are to be routed via the route that has been defined.
The default value is
seconds.
Description
Specify whether, when data packets are subsequently sent, the
two parameters Destination Address and Destination Port
must have the same value as the first data packet, i. e. whether
: Enter a destination port range.
: Enter a destination port range.
11 Networking
225
Hide quick links:
Advertisement
Table of Contents
