BinTec RS120 Reference Manual page 55

bintec elmeg GmbH
bintec RS Series
bintec RS232j
Property
Power consumption 4.7 Watt
of the device
Voltage supply 12 V DC 800 mA EU
PSU
Environmental re-
quirements:
Storage temperat- -25 °C to +70 °C
ure
Operating temper- 0 °C to +40 °C
ature
Relative atmo-
10 % to 90 % non-
spheric humidity
condensing in operation,
5 % to 95 % non-
condensing when stored
Room classification Only use in dry rooms.
Available inter-
faces:
ADSL interface Internal ADSL2+ modem
for Annex B / J
Serial interface Permanently installed,
V.24 supports Baud rates:
1200 to 115200 Baud
Ethernet IEEE Permanently installed
802.3 LAN (4-port (twisted pair only),
switch) 10/100/1000 mbps, auto-
sensing, MDIX
Ethernet Permanently installed
(twisted pair only),
10/100/1000 mbps, auto-
sensing, MDIX
ISDN BRI (S0) Built-in, only TE mode
WLAN interface -
(antennas)
UMTS/GPRS/LTE
bintec RS232jw bintec RS232j-4G
4.7 Watt 4.7 Watt
12 V DC 800 mA EU PSU 12 V DC 800 mA EU
PSU
-25 °C to +70 °C -25 °C to +70 °C
0 °C to +40 °C 0 °C to +40 °C
10 % to 90 % non- 10 % to 90 % non-
condensing in operation, condensing in operation,
5 % to 95 % non- 5 % to 95 % non-
condensing when stored condensing when stored
Only use in dry rooms. Only use in dry rooms.
Internal ADSL2+ modem Internal ADSL2+ modem
for Annex B / J for Annex B / J
Permanently installed, Permanently installed,
supports Baud rates: 1200 supports Baud rates:
to 115200 Baud 1200 to 115200 Baud
Permanently installed Permanently installed
(twisted pair only), (twisted pair only),
10/100/1000 mbps, auto- 10/100/1000 mbps, auto-
sensing, MDIX sensing, MDIX
Permanently installed Permanently installed
(twisted pair only), (twisted pair only),
10/100/1000 mbps, auto- 10/100/1000 mbps, auto-
sensing, MDIX sensing, MDIX
Built-in, only TE mode Built-in, only TE mode
-
802.11a/b/g/h with an-
tenna diversity; data rates
of 1-, 2-, 5.5-, 6-, 9-, 11-,
12-, 18-, 24-, 36-, 48-, 54
mbps
802.11n; data rates up to
300 mbps
Support for UMTS,
HSxPA (HSDPA with up
3 Installation
41