Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Fields in the menu Automatic Time Settings (Time Protocol)
Field
ISDN Timeserver
First Timeserver
Second Timeserver
Description
Only for devices with an ISDN interface.
Determine whether the system time is to be updated via ISDN.
If a time server is configured, the time is only determined over
ISDN until a successful update is received from this time server.
Updating over ISDN is deactivated for the period in which the
time is determined by means of a time server.
The function is activated by selecting
The function is disabled by default.
Enter the primary time server, by using either a domain name or
an IP address.
In addition, select the protocol for the time server request.
Possible values:
•
(default value): This server uses the simple network
time protocol via UDP port 123.
•
with UDP port 37.
•
with TCP port 37.
•
: This time server is not currently used for the time re-
quest.
Enter the secondary time server, by using either a domain name
or an IP address.
In addition, select the protocol for the time server request.
Possible values:
•
(default value): This server uses the simple network
time protocol via UDP port 123.
•
with UDP port 37.
•
with TCP port 37.
7 System Management
.
: This server uses the Time service
: This server uses the Time service
: This server uses the Time service
: This server uses the Time service
91
Hide quick links:
Advertisement
Table of Contents
