BinTec RS120 Reference Manual page 86

5 Access and configuration
72
The Save configuration button is found in the navigation bar.
If you save a current configuration, you can save this as the boot configuration or you can
also archive the previous boot configuration as a backup.
If you click the Save configuration button in the FCI, you will be asked "Do you really want
to save the current configuration as a boot configuration?"
You have the following two options:
•
•
configuration while also archiving previous boot configuration as backup.
If you want to load the archived boot configuration into your device, go to the
Maintenance->Software &Configuration menu, select Action =
and click on Go. The archived backup is used as the current boot configuration.
The navigation bar also contains the main configuration menus and their sub-menus.
Click the main menu you require. The corresponding sub-menu then opens.
If you click the sub-menu you want, the entry selected will be displayed in red. All the other
sub-menus will be closed. You can see at a glance the sub-menu you are in.
Status page
If you call the GUI, the status page of your device is displayed after you log in. The most
important data of your device can be seen on this at a glance.
Main configuration window
The sub-menus generally contain several pages. These are called using the buttons at the
top of the main window. If you click a button, the window is opened with the basic paramet-
ers. You can extend this by clicking the Advanced Settings tab, which displays the addi-
tional options.
Configuration elements
The various actions that you can perform when configuring your device in the GUI are
triggered by means of the following buttons:
GUI buttons
Button
, i.e. save the current configuration as the boot configuration
i.e. save current configuration as boot
Position
Updates the view.
bintec elmeg GmbH
bintec RS Series