BinTec RS120 Reference Manual page 247

bintec elmeg GmbH
bintec RS Series
Depending on the respective interface, a queue is created automatically for each class, but
only for data traffic classified as outgoing and for data traffic classified in both directions. A
priority is assigned to these automatic queues. The value of the priority is equal to the
value of the class ID. You can change the default priority of a queue. If you add new
queues, you can also use classes in other class plans via the class ID.
11.4.3.1 New
Choose the New button to create additional prioritisations.
Networking QoS
Fig. 92: ->
The Networking->QoS->QoS Interfaces/Policies->New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field
Interface
Prioritisation Al-
gorithm
QoS Interfaces/Policies
->
Description
Select the interface for which QoS is to be configured.
Select the algorithm according to which the queues are to be
processed. This activates and deactivates QoS on the selected
interface.
Possible values:
•
available bandwidth is distributed strictly according to the
queue priority.
•
The available bandwidth is distributed according to the
weighting (weight) of the queue. Exception: High-priority pack-
New
->
: QoS is activated on the interface. The
: QoS is activated on the interface.
11 Networking
233