BinTec RS120 Reference Manual page 446

Table of Contents

18 Local Services

Command Type

Event List Condition

Enter your chosen designation for the action.

Select the desired action.

Possible values:

(default value): Your device is rebooted.

: The desired value is entered for a MIB variable.

: The status of an interface is modified.

: Only for devices with a wireless LAN. The

status of a WLAN-SSID is modified.

: A software update is initiated.

onto your device or backed up by your device.

: Accessibility of an IP address is checked.

deleted or entered.

LAN. A scan of the 5 GHz frequency band is performed.

LAN. A scan of the 5.8 GHz frequency range is performed.

controller. A Neighbor Scan is initiated by the WLAN network

controlled by the WLAN controller.

: Only for devices with a WLAN controller.

The status of a wireless network is modified.

radio module is modified.

Select the event list you want which has been created in Local

Services->Scheduling->Trigger.

For the selected chains of events, select how many of the con-

figured events must occur for the operation to be initiated.

Possible values:

(default value): The operation is initiated if all events oc-

bintec elmeg GmbH

: A configuration file is loaded

: A certificate is to be renewed,

: Only for devices with a wireless

: Only for devices with a WLAN

: The operating mode of a WLAN

bintec RS Series

Show Quick Links

Table of Contents