Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Connection State
Destination IP Ad-
dress/Netmask
Destination Port/Range
Description
Possible values:
•
•
•
•
•
•
•
•
•
The default value is
.
See RFC 792.
Only if Protocol =
You can define a filter that takes the status of the TCP connec-
tions into account.
Possible values:
•
(default value): All TCP packets match the filter.
•
: All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
Enter the destination IP address and netmask of the data pack-
ets.
Possible values:
•
(default value)
•
: Enter the IP address of the host.
•
: Enter the network address and the related net-
mask.
Only if Protocol =
,
Enter a destination port number or a range of destination port
numbers that matches the filter.
11 Networking
243
Hide quick links:
Advertisement
Table of Contents
