BinTec RS120 Reference Manual page 204

10 Wireless LAN
190
Field
WMM
Max. Clients
Fields in the menu Security Settings
Field
Security Mode
Description
that ARP broadcasts that have been converted to ARP unicasts
are forwarded to IP addresses that are known internally. Uni-
casts are quicker and clients with an enabled power save func-
tion are not addressed.
The function is activated by selecting
The function is disabled by default.
Please note that ARP Processing cannot be applied in con-
junction with the MAC bridge function.
Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by selecting
The function is enabled by default.
Enter the maximum number of clients that can be connected to
this wireless network (SSID)
The maximum number of clients that can register with a wire-
less module depends on the specifications of the respective
WLAN module. This maximum is distrubuted across all wireless
networks configured for this radio module. No more new wire-
less networks can be created and a warning message will ap-
pear if the maximum number of clients is reached.
Possible values are whole numbers between
The default value is .
Description
Select the Security Mode (encryption and authentication) for
the wireless network.
Possible values:
• (default value): Neither encryption nor authentica-
tion
bintec elmeg GmbH
.
.
and .
bintec RS Series