BinTec RS120 Reference Manual page 335

Table of Contents

bintec elmeg GmbH

bintec RS Series

Preshared Key

Fields in the menu Interface Routes

IP Address Assign-

IP Assignment Pool

Default Route

ternative subject name by default. Make sure you and your peer

both use the same name, i.e. that your local ID and the peer ID

your partner configures for you are identical.

Enter the password agreed with the peer.

The maximum length of the entry is 50 characters. All charac-

ters are possible except for

Select the configuration mode of the interface.

Possible values:

(default value): Enter a static IP address.

IKEv1. Select this option if your gateway receives an IP ad-

dress from the server as IPSec client.

way assigns an IP address as server for connecting clients.

This is taken from the selected IP Assignment Pool.

Only where IP Address Assignment =

Possible values:

(default value): The client requests the IP address and

the gateway answers the request.

: The gateway suggests an IP address to the client and

the client must either accept or reject this.

This value must be identical for both sides of the tunnel.

Only if IP Address Assignment =

Select an IP pool configured in the VPN->IPSec->IP

Poolsmenu. If an IP pool has not been configured here yet, the

Only for IP Address Assignment =

at the start of the entry.

: Can only be selected for

: Select this option if your gate-

appears in this field.

Show Quick Links

Table of Contents