11 Networking
244
Field
Source IP Address/
Netmask
Source Port/Range
DSCP/TOS Filter
(Layer 3)
Description
Possible values:
•
(default value): The filter is valid for all port numbers
•
: Enables the entry of a port number.
•
numbers.
Enter the source IP address and netmask of the data packets.
Only if Protocol =
,
Enter a source port number or the range of source port num-
bers.
Possible values:
•
(default value): The filter is valid for all port numbers
•
: Enables the entry of a port number.
•
numbers.
Select the Type of Service (TOS).
Possible values:
•
(default value): The type of service is ignored.
•
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format, 6 bit).
•
according to RFC 3260 is used to signal the priority of IP
packets (indicated in decimal format).
•
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
•
: The TOS value is specified in binary
format, e.g. 00111111.
•
: The TOS value is specified in decimal
format, e.g. 63.
•
hexadecimal format, e.g. 3F.
bintec elmeg GmbH
: Enables the entry of a range of port
: Enables the entry of a range of port
: Differentiated Services Code Point
: Differentiated Services Code
: The TOS value is specified in
bintec RS Series