BinTec RS120 Reference Manual page 317

bintec elmeg GmbH
bintec RS Series
Fields in the ATM Profiles Parameter menu.
Field
Provider
Description
ATM Interface
Type
Virtual Path Identifier
(VPI)
Virtual Channel Identi-
fier (VCI)
Description
Select one of the preconfigured ATM profiles for your provider
from the list or manually define the profile using
.
Only for Provider =
Enter the desired description for the connection.
Only if several ATM interfaces are available, e.g. if several inter-
faces are separately configured in devices with SHDSL.
Select the ATM interface that you wish to use for the connec-
tion.
Only for Provider =
Select the protocol for the ATM connection.
Possible values:
•
(EthoA) is used for the ATM connection (Permanent Virtual
Circuit, PVC).
•
ATM (RPoA) is used for the ATM connection (Permanent Vir-
tual Circuit, PVC).
• : PPP over ATM (PPPoA) is used for the ATM
connection (Permanent Virtual Circuit, PVC).
Only for Provider =
Enter the VPI value of the ATM connection. The VPI is the iden-
tification number of the virtual path to be used. Note your pro-
vider's instructions.
Possible values are to
The default value is .
Only for Provider =
Enter the VCI value of the ATM connection. The VCI is the iden-
(default value): Ethernet over ATM
: Routed Protocols over
.
14 WAN
303