Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Password
Key Size
Autosave Mode
Use CRL
Select radio
Description
Only where Command Type =
and Action =
To obtain certificates, you may need a password from the certi-
fication authority. Enter the password you received from the cer-
tification authority here.
Only where Command Type =
and Action =
Select the length of the key to be created. Possible values are
(default value),
Only where Command Type =
and Action =
Select whether your device automatically stores the various
steps of the enrolment internally. This is an advantage if enrol-
ment cannot be concluded immediately. If the status has not
been saved, the incomplete registration cannot be completed.
As soon as the enrolment is completed and the certificate has
been downloaded from the CA server, it is automatically saved
in the device configuration.
The function is enabled by default.
Only where Command Type =
and Action =
Define the extent to which certificate revocation lists (CRLs) are
to be included in the validation of certificates issued by the own-
er of this certificate.
Possible values:
•
(default value): In case there is an entry for a CDP, CRL
distribution point this should be evaluated in addition to the
CRLs globally configured in the device.
•
: CRLs are always checked.
•
: No checking of CRLs.
Only where Command Type =
or
and
.
18 Local Services
,
441
Hide quick links:
Advertisement
Table of Contents
