BinTec RS120 Reference Manual page 218

Table of Contents

11 Networking

Fields in the menu Route Parameters

Local IP Address

Destination IP Ad-

dress/Netmask

ceived by DHCP are supplemented by routing information

about a particular network.

When the DHCP lease expires or when the device is re-

started, the routes that consist from the combination of DH-

CP settings and those made here are initially deleted once

more from the active routing. If the DHCP is reconfigured

they are re-generated and re-activated.

Select the interface to be used for this route.

Select the type of Route Class.

Possible values:

: Defines a route with the default parameters.

: Select whether the route is to be defined with ex-

tended parameters. If the function is active, a route is created

with extended routing parameters such as source interface

and source IP address, as well as protocol, source and des-

tination port, type of service (TOS) and the status of the

device interface.

Only for Route Type =

Enter the IP address of the host to which your device is to for-

ward the IP packets.

Only for Route Type

Enter the IP address of the destination host or destination net-

bintec elmeg GmbH

bintec RS Series

Show Quick Links

Table of Contents