Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Description
Connection Type
User Name
Remote User (for Dial-
in only)
Password
Always on
Connection Idle
Timeout
Fields in the IP Mode and Routes menu.
Description
Enter a name for uniquely identifying the connection partner.
The first character in this field must not be a number No special
characters or umlauts must be used.
Select which layer 1 protocol your device should use.
This setting applies for outgoing connections to the connection
partner and only for incoming connections from the connection
partner if they could be identified on the basis of the calling
party number.
Possible values:
•
: For 64-kbps ISDN data connections.
•
: For 56-kbps ISDN data connections.
Enter your device code (local PPP user name).
Enter the code of the remote terminal (remote PPP user name).
Enter the password.
Select whether the interface should always be activated.
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Only if Always on is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are
to
timeout. The default value is
.
(seconds).
deactivates the
.
14 WAN
289
Hide quick links:
Advertisement
Table of Contents
